Others

customtech_mp_sellsheet_ss190_12-21-18_f

PATCHES

FAST SETTING, CALCIUM ALUMINATE COMPOUND

SILK™ PATCHING & FINISHING COMPOUND

A fast-curing, calcium aluminate based, patching and finishing compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. Formulated with Controlled Cure Technology,™ Silk helps eliminate installation problems of bond failure, crumbling, mildew and staining of resilient flooring due to free-moisture found in traditional underlayments. Its rapid setting formula allows installation of most floor coverings in as little as 30 minutes

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition tile (VCT)

  • Sheet vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • Superior mixing and handing

  • Excellent for skim coat patching applications

  • No additives required

  • Apply from featheredge to 1"

  • Install flooring in as little as 30 minutes

  • Smooths the finishes on interior subfloors

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

TECH PATCH-MP MULTIPURPOSE RAPID SETTING SKIM COAT & FLOOR PATCH

Tech Patch MP is a fast setting, calcium aluminate compound that provides a smooth finish on interior subfloors prior to the installation of a wide variety of floor coverings. Mix with water only to patch, level or skim coat concrete, OSB and plywood up to 1/2" (12 mm) thick per application. Install floor coverings in as little as 30 – 90 minutes.

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet

  • Vinyl composition tile (VCT) Sheet vinyl flooring Laminated flooring

  • Pavers, brick

  • Stone, terrazzo tile

Key Features

Features/Benefits of Product in the Installation

  • Patches and smooths interior subfloors

  • Apply from featheredge to 1/2"

  • Quick - setting formula permits floor covering installation in as little as 30 - 90 minutes

  • Use as a thin skimcoat to smooth existing finishes

  • Patches and levels concrete and plywood to 1/2" (12mm)

DOCUMENTS

Coverage Chart

THICKNESS
MIX COVERAGE
MAX COVERAGE
1/2" (12 mm)
6.91 ft² (0.64 M²)
7.85 ft² (0.73 M²)
1/4" (6 mm)
13.82 ft² (1.28 M²)
15.70 ft² (1.46 M²)
1/8" (3 mm)
27.65 ft² (2.57 M²)
31.39 ft² (2.92 M²)
1/16” (1.6 mm)
55.2 ft² (5.13 M²)
62.4 ft² (5.80 M²)

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

TECHPATCH RP RAMPING PATCH

TechPatch RP is a premium quality calcium aluminate, fast setting underlayment product with exceptional handling characteristics, used for ramping, patching or screeding suitable horizontal substrates. TechPatch RP can be installed from featheredge to 1.5" neat under most commercial and residential floor coverings.

Uses:

  • Use as a patching and ramping compound on porous concrete or over primed ceramic tile, stone, terrazzo, and other non-porous surfaces.

  • Do not use over plywood, OSB board, metal, fiberglass, particle board, hardwood, parquet, or cushion backed vinyl flooring.

  • Do not use when the temperature is below 50°F (10°C)

Key Features

Features/Benefits of Product in the Installation

  • Patches and smooths interior subfloors

  • Install most flooring in just 60 - 90 minutes

  • Apply from featheredge to 1.5"

  • Exceptional handling properties

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

CUSTOMTECH TECHPATCH - TW TILT WALL FINISHING COMPOUND

CUSTOMTECH TechPatch - TW is a rapid-curing, calcium aluminate cement based compound used to fill and finish exterior and interior concrete and masonry vertical surfaces. Use to hide large and small chips, holes and irregularities on tilt-up concrete; casted concrete and other masonry surfaces before painting or sealing.

Application of Product:

Apply only when temperatures are above 50°F (10°C) following accepted practices for concrete products. Remove dust and debris from area to be patched. Apply patch to the surface using a steel trowel with pressure to completely fill voids or cracks. When required use a damp sponge or float for finishing while curing; sand or apply additional lifts after patch has taken set.

Key Features

Features/Benefits of Product in the Installation

  • Superior mixing and handling

  • Excellent for tilt wall patch and finishing

  • Featheredge to deep fill

  • Mix with water only

  • Dries quickly 15-60 minutes

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.