TECHlevel%20150_Page_1_edited.jpg

LEVELERS

HIGH QUALITY SELF-LEVELING UNDERLAYMENT

CUSTOMTECH™ TECHLEVEL™ XP-1™ SELF-LEVELING UNDERLAYMENT

TechLevel™ XP­1® is a high performance, calcium aluminate-based, high strength, low prep, self-leveling underlayment that levels floors prior to the installation of ceramic tile, natural stone tile, resilient flooring, carpet, wood and other floor coverings. This quick-setting underlayment can be applied to 2" (5 cm) thick in one pour and seeks its own level in minutes. Formulated to have high compressive strength and abrasion resistance, XP-1 achieves an extra heavy rating for high impact use in food plants, hospitals, and kitchens. XP-1 may be applied to in residential structures with floor joists up to 24" (61 cm) o.c.

Formulated using Controlled Cure Technology,™ XP­1 helps eliminate installation problems such as bond failure, crumbling and staining of resilient flooring caused by the free moisture found in traditional underlayment.

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • Low Prep Formula; Just Sweep, Prime & Pour

  • Abrasion Resistant - Holds up to traffic during construction

  • 5,500 PSI Compressive Strength

  • Exceeds ASTM requirements for resilient floor covering installations

  • High flow formula has excellent handling and excellent flow retention properties

  • Crack resistant

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

TECHLEVEL-HPT HIGH PERFORMANCE TOPPING

TechLevel-HPT is a High Performance, Self-Leveling Topping designed for fast-track resurfacing and smoothing of interior substrates such as concrete, porous tile and certain non- porous surfaces when properly prepared. TechLevel-HPT can be sealed to create a concrete wear surface for commercial, light industrial and residential applications.

TechLevelHPT can be installed from 1/4” to 1” in one application. TechLevel-HPT is pourable and seeks its own level to produce a smooth, flat, durable surface that hardens quickly and dries fast

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • Versatile product, performs as high performance SLU or interior wear surface topping

  • Compressive strength > 6,000 psi

  • Cures fast; walkable in as little as 2 hours and accepts coatings in 24 hours

  • Crack resistant, exceptionally smooth surface

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

TECHLEVEL™ WSF - FIBER REINFORCED SELF-LEVELING UNDERLAYMENT

TechLevel-WSF SLU is a high flow, fiber reinforced calcium aluminate cement based, self-leveling underlayment that eliminates the need for reinforcing lath over plywood and OSB on interior wood framed subfloors. It produces a smooth, level substrate ready for the installation of ceramic and natural stone tile, wood, carpet, and other resilient floor coverings.

Formulated using Controlled Cure Technology™, TechLevel-WSF SLU helps eliminate installation problems such as bond failure, crumbling and staining of resilient flooring caused by the free moisture found in traditional underlayment.

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • No lath required for plywood and OSB subfloors

  • High strength for 1/4" to 1.5" nominal pours

  • Low Prep Formula; Just Sweep, Prime & Pour- no sandblasting required on acceptable surfaces

  • Compatible with most radiant heating systems

  • Exceeds TCNA and ASTM requirements for ceramic tile and resilient floor covering installations

  • High flow formula has excellent handling and exceptional flow retention properties

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

CUSTOMTECH™ TECHLEVEL™ 100 SELF-LEVELING UNDERLAYMENT

TechLevel™ 100 is a high quality self-­leveling underlayment that achieves greater than 4000 psi compressive strength. TechLevel 100 levels floors prior to the installation of tile, resilient flooring, carpet, wood and other floor coverings. This underlayment can be applied up to 1.5" (3.8 cm) thick in one pour and seeks its own level in minutes.

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • Levels floors from 3/16" to 1-1/2" thick

  • Crack resistant

  • Exceeds ASTM requirements for resilient floor covering installations

  • Can be applied from 3/16" to 1.5" ( 3.8cm ) thick in a single pour

  • Cures fast and develops high early - strength for quick installation

DOCUMENTS

Coverage Chart

THICKNESS
COVERAGE
1.5" (38.1 mm)
3.8 -­ 4 ft² (0.35 ­- 0.37 M²)
1" (25.4 mm)
5.75 -­ 6 ft² (0.52 -­ 0.55 M²)
1/2" (12.7 mm)
11.5 -­ 12 ft² (1.05 -­ 1.1 M²)
1/4" (6.35 mm)
23 -­ 24 ft² (2.1 -­ 2.2 M²)
1/8" (3.18 mm)
46 -­ 48 ft² (4.2 -­ 4.4 M²)

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

TECHLEVEL 125 DEEP POUR SELF-LEVELING UNDERLAYMENT

TechLevel 125 is a high quality, self-leveling underlayment that achieves up to 4,000 psi compressive strength. TechLevel 125 levels floors prior to the installation of resilient flooring, carpet, wood, ceramic tile, natural stone tile and other floor coverings. This quick setting underlayment can be applied 1/4" to 3" (7.6cm) thick in one pour and seeks its own level in minutes. Formulated to have excellent physical strength, TechLevel 125 may be applied in residential structures with floor joists up to 24" (61 cm) o.c. Formulated using Controlled Cure Technology™, TechLevel 125 helps eliminate installation problems such as bond failure, crumbling and staining of resilient flooring caused by the free moisture found in traditional underlayment

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • High strength for ¼” to 3” in one pour for thick build applications

  • Low Prep Formula; Just Clean, Prime & Pour

  • Superior Crack Resistance - Formula reduces shrinkage & minimizes cracks

  • Up to 4000 PSI Compressive Strength

  • Exceeds ASTM requirements for resilient floor covering installations

  • High flow formula has excellent handling and exceptional flow retention properties

  • Crack resistant

DOCUMENTS

Coverage Chart

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

CUSTOMTECH™ TECHLEVEL™ 150 SELF-LEVELING UNDERLAYMENT

TechLevel™ 150 is a premium, calcium aluminate­based, high quality self-leveling underlayment that achieves greater than 4300 psi compressive strength and incorporates low-prep technology. TechLevel 150 levels floors prior to the installation of ceramic tile, natural stone tile, resilient flooring, carpet, wood and other floor coverings. This quick setting underlayment can be applied up to 1.5" (3.8 cm) thick in one pour and seeks its own level in minutes. Formulated to have excellent compressive strength, TechLevel 150 may be applied in residential structures with floor joists up to 24" (61 cm) o.c.

Formulated using Controlled Cure Technology™, TechLevel 150 helps eliminate installation problems such as bond failure, crumbling and staining of resilient flooring caused by the free moisture found in traditional underlayment.

Suitable as an Underlayment for:

  • Carpet

  • Wood, parquet flooring

  • Luxury Vinyl Tile/Planks (LVT/LVP)

  • Vinyl composition flooring (VCT)

  • Sheet Vinyl and rubber flooring

  • Laminated flooring

  • Ceramic, mosaic, quarry or cement body tile

  • Impervious porcelain and glass tile

  • Cement-based precast terrazzo

  • Natural stone tile

  • Terrazzo

Key Features

Features/Benefits of Product in the Installation

  • Low Prep Formula; Just Clean, Prime & Pour

  • Superior Crack Resistance - Formula reduces shrinkage & minimizes cracks

  • 4,300 PSI compressive Strength

  • Exceeds ASTM requirements for resilient floor covering installations

  • High flow formula has excellent handling and exceptional flow retention properties

  • Crack resistant

  • No shot blasting required on acceptable surfaces

  • Can be applied from featheredge to 1.5" ( 3.8 cm ) thick in a single pour

  • Reduces bond failure and crumbling of resilient flooring

  • Cures fast and develops high early - Strength for quick installation

  • Rated for extra heavy use on concrete and wood subfloors with joists to 24" ( 61 cm ) per ASTM C627

DOCUMENTS

Coverage Chart

THICKNESS
COVERAGE
1.5" (38.1 mm)
3.8 -­ 4 ft² (0.35 ­- 0.37 M²)
1" (25.4 mm)
5.75 -­ 6 ft² (0.52 -­ 0.55 M²)
1/2" (12.7 mm)
11.5 -­ 12 ft² (1.05 -­ 1.1 M²)
1/4" (6.35 mm)
23 -­ 24 ft² (2.1 -­ 2.2 M²)
1/8" (3.18 mm)
46 -­ 48 ft² (4.2 -­ 4.4 M²)

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.